Description
- 【Function】The floor jack provides perfect support for stairs, porches, decks, crawl spaces etc.This mini jack can also be used as auxiliary support.
- 【Specification】Range of adjustment: 4.3″ – 6.6″; minimum and maximum height capacity: 4500 lb; base plate dimension: 3.78″ x 3.78″ x 0.19″; top plate dimension: 3.23″ x 3.23″ x 0.19″.
- 【Installation】Simply keep the base plate stationary and swivel the top plate to required height, and then tighten the positioning nut with a wrench in order to secure the top plate, even one person can install and use in seconds.
- 【High Quality】This adjustable…
Walter Desteli –
They work Great. Great Quality . Strong sturdy support . Highly recommend
david greeson –
well built
Thomas O. Stephens, Jr. –
easy to handle
Dan Guild –
The biggest problem is adjusting them tight needs nut welded under top plate that way channel lock pliers worked. Other than that once in work great.
Jason Back –
Not a great design. It needs to be able to swivel at the top to take the load and adjust the height, can’t do that as you receive them. You can drill out the threads on the welded tube and use the nut as the adjustment which will allow it to swivel which is what I did.
You get what you pay for,…
JohnnyO –
These jacks are light yet strong and were perfect for my application. A well designed product.
Daximus –
Need a wrench to tighten up,could have had a bar attached to tighten up did the job.
Nancy –
These jacks look very nice. Unfortunately, they welded both the base and the screw to the relative flanges. When you turn the screw to extend the jack, the flange turns. It should have a swivel built in between the screw and the flange so the flange would not turn and can remain stationary. I am…
michael –
Well constructed and excellent value
JohnnyO –
I had a porch roof that was collapsing due to heavy snow. These allowed me to keep it from collapsing further till it can be repaired in the spring. Keep in mind these don’t jack up the structure. They can be held in place and tightening the screw only moves them up a few millimeters to stay in…