【2 PACK 4″ x 4″ LAB JACK STAND PLATFORM】 Top platform size: 4 x 4″ / 100 x 100mm.
【SUPPORT 5KG WEIGHT】 The mini lab aluminum lift table can support loads up to 5kg / 11lbs, providing stable support for small lab supplies, such as flasks, glassware, water baths, and more.
【HIGH QUALITY ALUMINUM MATERIAL】 The lab scissor jack is made of high quality aluminum platform and blue sprayed surface, aluminum oxide frame; Rust-proof, corrosion resistant, long service life.
【ADJUSTABLE HEIGHT】 It can be vertically adjusted from 50mm (2.0″) to 145mm (5.7″). Simple and smooth height position, twist the…
Additional information
Specification: 2 Pack Lab Jack Stand Platform 4″ x 4
8 reviews for 2 Pack Lab Jack Stand Platform 4″ x 4
5.0out of 5
★★★★★
★★★★★
8
★★★★★
0
★★★★★
0
★★★★★
0
★★★★★
0
Write a review
Show allMost HelpfulHighest RatingLowest Rating
★★★★★
Derek Siedentopf –
I use this at work regularly to help me level parts on my work bench to make working on them easier. Gone are the days of finding a piece of wood just thick enough to do the job. This little tool is easy to adjust and quite stable for its size. It isn’t going to be doing any heavy lifting with…
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
Shiny –
This laboratory rising stage is just as good as I needed it to be. It rises in a level fashion and it lowers just the same. It doesn’t squeak or creak when adjusting the height, which all the other ones I’ve ever used do, so that’s a big plus. It looks good, and it seems like it will last a long…
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
Viking Lawyer –
This works great, I use it to fine tune the height I need for my fiber laser and can keep the item in place for a long deep engraving.
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
Dylan Powell –
I’ll be honest: when I bought this I really didn’t know what I’d use it for… it just looked cool. Well, it turns out this is super useful! I have a fairly small workspace and I love tinkering with things but often do not have the proper tools to facilitate my work. Sometimes I need to join or…
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
Keir A Dykstra –
I 3D printed a similar jack stand and while it did work, it was a bit fiddly and wasn’t very stable. This one is rock solid. The threaded rod is smooth and I can precisely set the height I need. Almost everything is aluminum or steel. The only plastic parts appear to be the fixed pivot points on…
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
Living in Hawaii –
Lab-jacks are tiny little scissor-jacks that you can use to lift/lower small objects. These are well made, no slop in the joints, all in all a great little device. The listed weight limit is 5 kg. I’ve been using this as a wedge — an empty space filler — in one of my toolboxes that I keep…
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
MK –
Sturdy, works very smoothly
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
Viking Lawyer –
I love how sturdy this little jack is. No matter how high or low I position it, it’s steady and has almost zero play in either torsion or lateral movement. I think this is a great little Lab Jack and I’d recommend it for many things in the Lab. Because it’s small, it works well at positioning…
Derek Siedentopf –
I use this at work regularly to help me level parts on my work bench to make working on them easier. Gone are the days of finding a piece of wood just thick enough to do the job. This little tool is easy to adjust and quite stable for its size. It isn’t going to be doing any heavy lifting with…
Shiny –
This laboratory rising stage is just as good as I needed it to be. It rises in a level fashion and it lowers just the same. It doesn’t squeak or creak when adjusting the height, which all the other ones I’ve ever used do, so that’s a big plus. It looks good, and it seems like it will last a long…
Viking Lawyer –
This works great, I use it to fine tune the height I need for my fiber laser and can keep the item in place for a long deep engraving.
Dylan Powell –
I’ll be honest: when I bought this I really didn’t know what I’d use it for… it just looked cool. Well, it turns out this is super useful! I have a fairly small workspace and I love tinkering with things but often do not have the proper tools to facilitate my work. Sometimes I need to join or…
Keir A Dykstra –
I 3D printed a similar jack stand and while it did work, it was a bit fiddly and wasn’t very stable. This one is rock solid. The threaded rod is smooth and I can precisely set the height I need. Almost everything is aluminum or steel. The only plastic parts appear to be the fixed pivot points on…
Living in Hawaii –
Lab-jacks are tiny little scissor-jacks that you can use to lift/lower small objects. These are well made, no slop in the joints, all in all a great little device. The listed weight limit is 5 kg. I’ve been using this as a wedge — an empty space filler — in one of my toolboxes that I keep…
MK –
Sturdy, works very smoothly
Viking Lawyer –
I love how sturdy this little jack is. No matter how high or low I position it, it’s steady and has almost zero play in either torsion or lateral movement. I think this is a great little Lab Jack and I’d recommend it for many things in the Lab. Because it’s small, it works well at positioning…